Sodium bisulfate, also known as sodium hydrogen sulfate, is the sodium salt of the bisulfate anion, with the molecular formula NaHSO4. Sodium bisulfate is an acid salt formed by partial neutralization of sulfuric acid by an equivalent of sodium base, typically either in the form of sodium hydroxide or sodium chloride. It is a dry granular product that can be safely shipped and stored. The anhydrous form is hygroscopic. Solutions of sodium bisulfate are acidic, with a 1M solution having a pH of around 1.
Maps, Directions, and Place Reviews
Production
One production method involves mixing stoichiometric quantities of sodium hydroxide and sulfuric acid which react to form sodium bisulfate and water.
A second production method involves reacting sodium chloride (salt) and sulfuric acid at elevated temperatures to produce sodium bisulfate and hydrogen chloride gas.
The liquid sodium bisulfate is sprayed and cooled so that it forms a solid bead. The hydrogen chloride gas is dissolved in water to produce hydrochloric acid as a useful coproduct of the reaction. Sodium bisulfate is also produced as a byproduct of the production of many other mineral acids via the reaction of their sodium salts with an excess of sulfuric acid:
- NaCN + H2SO4 -> NaHSO4 + HCN
- NaNO3 + H2SO4 -> NaHSO4 + HNO3
- NaClO4 + H2SO4 -> NaHSO4 + HClO4
In most cases, the acids produced have a lower boiling point than the reactants and are separated from the reaction mixture by distillation.
There are only two producers in the USA, one being Jones-Hamilton Co., who uses the sulfuric acid/sodium chloride process, which produces the anhydrous form. The other supplier, Jost Chemical, uses the sodium hydroxide/sulfuric acid method, which produces the monohydrate.
Clean Grout With Vinegar And Baking Soda Video
Uses
Sodium bisulfate is used primarily to lower pH. For technical-grade applications, it is used in metal finishing, cleaning products, and to lower the pH of water for effective chlorination in swimming pools and hot tubs. Sodium bisulfate is also AAFCO approved as a general-use feed additive, including companion animal food. It is used as a urine acidifier to reduce urinary stones in cats.
It is highly toxic to at least some echinoderms, but fairly harmless to most other life forms; sodium bisulfate is used in controlling outbreaks of crown-of-thorns starfish.
In jewelry making, sodium bisulfate is the primary ingredient used in many pickling solutions to remove the oxidation layer from surfaces, which occurs after heating. Sodium bisulfate was the primary active ingredient in crystal toilet bowl cleaners Vanish and Sani-Flush, both now discontinued.
In the textiles industry, it is sometimes applied to velvet cloth made with a silk backing and a pile of cellulose-based fiber (rayon, cotton, hemp, etc.) to create "burnout velvet": the sodium bisulfate, when applied to such a fabric and heated, causes the cellulose-based fibers to become brittle and flake away, leaving burned-out areas in the finished material, usually in attractive patterns.
Sodium bisulfate is the active ingredient in some granular poultry litter treatments used to control ammonia. Sodium bisulfate has also been shown to significantly reduce the concentration of Campylobacter and Salmonella in chicken houses.
In food
Sodium bisulfate is used as a food additive to leaven cake mixes (make them rise) as well as being used in meat and poultry processing and most recently in browning prevention of fresh-cut produce. Sodium bisulfate is considered generally recognized as safe (GRAS) by the FDA. The food-grade product also meets the requirements set out in the Food Chemicals Codex. It is denoted by E number E514ii in the EU and is also approved for use in Australia, New Zealand, Canada, and Mexico. where it is listed as additive 514. Food grade sodium bisulfate is used in a variety of food products, including beverages, dressings, sauces, and fillings. It has many synonyms including bisulfate of soda, sodium acid sulfate, mono sodium hydrogen sulfate, sodium hydrogen sulfate, sodium hydrosulfate, and sulfuric acid sodium salt (1:1).
Sodium bisulfate is considered natural by the Grocery Manufacturers Association (GMA) since it is made from minerals. No artificial or synthetic ingredients are used in the manufacturing. No covalent bonds are broken or formed in the manufacturing process, therefore it is not synthetic.
Sodium bisulfate lowers the pH without a sour taste and has been used in the place of citric, malic or phosphoric acids and can also be used as an anti-browning agent.
Source of the article : Wikipedia
EmoticonEmoticon