Piranha solution, also known as piranha etch, is a mixture of sulfuric acid (H2SO4) and hydrogen peroxide (H2O2), used to clean organic residues off substrates. Because the mixture is a strong oxidizing agent, it will remove most organic matter, and it will also hydroxylate most surfaces (add OH groups), making them highly hydrophilic (water-compatible).
Maps, Directions, and Place Reviews
Preparation and use
Many different mixture ratios are commonly used, and all are called piranha. A typical mixture is 3 parts of concentrated sulfuric acid and 1 part of 30% hydrogen peroxide solution; other protocols may use a 4:1 or even 7:1 mixture. A closely related mixture, sometimes called "base piranha", is a 3:1 mixture of ammonia water with hydrogen peroxide.
Piranha solution must be prepared with great care. It is highly corrosive and an extremely powerful oxidizer. Surfaces must be reasonably clean and completely free of organic solvents from previous wash steps before coming into contact with the solution. Piranha solution cleans by dissolving organic contaminants, and a large amount of contaminant will cause violent bubbling and a release of gas that can cause an explosion.
Piranha solution should always be prepared by adding hydrogen peroxide to sulfuric acid slowly, never in reverse. Mixing the solution is extremely exothermic. If the solution is made rapidly, it will instantly boil, releasing large amounts of corrosive fumes. Even when made with care, the resultant heat can bring solution temperatures above 100 °C. It must be allowed to cool reasonably before it is used. The sudden increase in temperature can also lead to violent boiling of the extremely acidic solution. Solutions made using hydrogen peroxide at concentrations greater than 50% may cause an explosion. Once the mixture has stabilized, it can be further heated to sustain its reactivity. The hot (often bubbling) solution cleans organic compounds off substrates and oxidizes or hydroxylates most metal surfaces. Cleaning usually requires about 10 to 40 minutes, after which the substrates can be removed from the solution.
The solution may be mixed before application or directly applied to the material, applying the sulfuric acid first, followed by the peroxide. Due to the self-decomposition of hydrogen peroxide, piranha solution should be used freshly prepared. The solution should not be stored, as it generates gas and therefore cannot be kept in a closed container. As the solution reacts violently with many items commonly disposed of as chemical waste if the solution has not neutralised, it must be left in clearly marked containers.
Hydrogen Peroxide For Cleaning Grout Video
Applications
Piranha solution is used frequently in the microelectronics industry, e.g. to clean photoresist residue from silicon wafers.
Hobbyist electronics enthusiasts use the solution to etch home made circuit boards. A mask is applied to a blank copper board, and the piranha solution rapidly removes the exposed copper not covered by the mask.
In the laboratory, this solution is sometimes used to clean glassware, though it is discouraged in many institutions and it should not be used routinely due to its dangers. Unlike chromic acid solutions, piranha does not contaminate glassware with heavy-metal ions.
Piranha solution is particularly useful when cleaning sintered (or "fritted") glassware. The size of the pores of sintered glassware is critical for its function, so it should not be cleaned with strong bases, which gradually dissolve the sinter. Sintered glass also tends to capture material deep within the structure, making it difficult to remove. Where less aggressive cleaning methods fail, piranha solution can be used to return the sinter to a pristine white, free-flowing form without excessive damage to the pore dimensions. This is usually accomplished by allowing the solution to percolate backward through the sintered glass. Although cleaning sintered glassware will leave it as clean as possible without damaging the glassware it is not recommend due to the risk of explosion.
Piranha solution is used to make glass hydrophilic by hydroxylating the surface, thus increasing the number of silanol groups on the surface.
Mechanism
The effectiveness of piranha solution in removing organic residues is due to two distinct processes that operate at noticeably different rates. The first and faster process is removal of hydrogen and oxygen as units of water by the concentrated sulfuric acid. This occurs because hydration of concentrated sulfuric acid is thermodynamically strongly favorable, with a ?H of -880 kJ/mol. It is this rapid dehydrating property, rather than acidity itself, that makes concentrated sulfuric acid, and so piranha solution, very dangerous to handle.
The dehydration process exhibits itself as the rapid carbonisation of common organic materials, especially carbohydrates, when immersed in piranha solution. Piranha solution was named in part for the vigour of this first process, since large quantities of organic residues immersed in the solution are dehydrated so violently that the process resembles a piranha feeding frenzy. The second and more definitive rationale for the name, however, is the ability of piranha solution to "eat anything", in particular, elemental carbon in the form of soot or char.
This second and far more interesting process can be understood as the sulfuric-acid boosted conversion of hydrogen peroxide from a relatively mild oxidizing agent into one sufficiently aggressive to dissolve elemental carbon, a material that is notoriously resistant to room-temperature aqueous reactions. This transformation can be viewed as the energetically favourable dehydration of hydrogen peroxide to form hydronium ions, bisulfate ions, and, transiently, atomic oxygen:
It is this extremely reactive atomic oxygen species that allows piranha solution to dissolve elemental carbon. Carbon allotropes are difficult to attack chemically because of the highly stable and typically graphite-like hybridized bonds that surface carbon atoms tend to form with each other. The most likely route by which the solution disrupts these stable carbon-carbon surface bonds is for an atomic oxygen first to attach directly to a surface carbon to form a carbonyl group:
In the above process, the oxygen atom in effect "steals" an electron bonding pair from the central carbon, forming the carbonyl group and simultaneously disrupting the bonds of the target carbon atom with one or more of its neighbours. The result is a cascading effect in which a single atomic oxygen reaction initiates significant "unraveling" of the local bonding structure, which in turn allows a wide range of aqueous reactions to affect previously impervious carbon atoms. Further oxidation, for example, can convert the initial carbonyl group into carbon dioxide and create a new carbonyl group on the neighbouring carbon whose bonds were disrupted:
The carbon removed by piranha solution may be either original residues or char from the dehydration step. The oxidation process is slower than the dehydration process, taking place over a period of minutes. The oxidation of carbon exhibits itself as a gradual clearing of suspended soot and carbon char left by the initial dehydration process. In time, piranha solutions in which organic materials have been immersed typically will return to complete clarity, with no visible traces of the original organic materials remaining.
A final minor contribution to the piranha solution cleaning is its high acidity, which dissolves deposits such as metal oxides and carbonates. However, since it is safer and easier to remove such deposits using milder acids, the solution is more typically used in situations where high acidity facilitates cleaning instead of complicating it. For substrates with low tolerance for acidity, the alkaline oxidising solution known as base piranha is preferred.
Safety and disposal
Piranha solution is very dangerous, being both strongly acidic and a strong oxidizer. Solution that is no longer being used should never be left unattended if hot. It should not be stored in a closed container. Piranha solution should not be disposed of with organic solvents (e.g. in waste solvent carboys), as this will cause a violent reaction and a substantial explosion.
The solution should be allowed to cool, and oxygen gas should be allowed to dissipate prior to disposal. When cleaning glassware, it is both prudent and practical to allow the piranha solution to react overnight. This allows the spent solution to degrade prior to disposal. While some institutions believe that used piranha solution should be collected as hazardous waste, others believe that it can be neutralized and poured down the drain with copious amounts of water. Attempting neutralization by adding bases can instead cause fast decomposition, which releases pure oxygen.
Source of the article : Wikipedia
EmoticonEmoticon